HSM 208F 14 t

Thick trunk timber? Lots to move? Long skidding routes? - Then the HSM 208F 14 t is the right choice for you. Manufactured with the focus on productivity, driving stability and reliability with no compromises, the 14 tonner is the optimum choice in the upper performance category. The powerful Iveco 6-cylinder engine, the 2 motor hydrostatic gearbox and its high capacity enable extremely economical forwarding even in difficult terrain and over long skidding routes. The objective is clear: maximum performance with the lowest impact on resources. The HSM philosophy covers high quality standards, innovative technology concepts and legendary reliability. Entrust us with your success, the HSM 208F 14 t is sure to meet your requirements.

Technical data 208F

Brake:
  • Brake with 2-circles, oil-cooled multiple-disc power-brake
  • Spring accumulator – parking brake
Steering:
  • Articulated frame steering with 2 cylinders
  • Steering angle 45°
Cabin:
  • Raisable to side on parallel linkages
  • ROPS, FOPS, OPS tested
  • Rotary seat with pedals in front and rear
  • Wiper in front and rear, optional on the side
  • Air cushioned seat with seat heating
  • Hot-water heating
  • Air conditioning
Electrical system / Instruments:
  • HSM Ecommand colour-display
  • 5 operator programs + factory setting
  • Diagnosis-tool and error-indication
  • Graphic support at parameter editing
  • Generator 110 A (28 V)
  • 2 service-free dry batteries á 75 Ah
Power train:
  • NAF 2 speed transfer gearbox
  • HSM High Speed Drive (serial 71); speed at 1st gear 0-14 km/h
Standard equipment:
  • 14 LED-working headlight at cabin
  • 4 working headlights at crane
  • Potential transformer 24 V - 12 V
  • Radio with CD
  • Fire extinguisher
  • First aid kit
  • Warning triangle
  • Tool kit
  • Cooling box
  • Reversing camera with color monitor
  • Rear headlights
  • Twist lock with 2 hydraulic cylinders
Special equipment:
  • Front dozer-blade
  • Tandem axle lift (Bogielift) front
  • Turnable rung
  • Last rung plugged
  • Tiltable crane
  • Quick-change system for rungs
  • Clambunk
  • Auxiliary heating
  • Bogie-tracks
  • Radio control for winch
  • Drive by radio
  • Sun blinds
  • Pluggable front grid
  • Cab suspension
  • Other options on request
14 t rear frame with tilt-crane
Diagrammed:
  • Crane tiltable with angle - 5° / + 26°
  • Grid displaceable and demountable
  • Single drum-rearwinch 10 to
  • Rungs relocatable
  • 4th rung pluggable
Special equipment:
  • Grid, high adjustable
  • Rungs telescopic (width)
  • Clambunk with quick-change system
  • Moveable rungs
  • Single drum-rearwinch
  • Turnable rung
  • Grid pluggable
  • 4th rung pluggable
  • Other options on request

Technical data 208F 6 cylinder

Engine:
  • VOLVO
    TAD871VE EU Stage IV / EPA T4f
    Power: 185 kW (252 HP) at 1600 rpm
    max. revolution: 1150 Nm at 1100 - 1500 rpm
    max. torque: 1160 Nm at 1200 rpm
    Displacement: 7,7 liter

    Optional:

  • VOLVO
    TAD872VE EU Stage IV / EPA T4f
    Power: 210 kW (286 HP) at 1700 rpm
    max. revolution: 1225 Nm at 1100 - 1600 rpm
    max. torque: 1235 Nm at 1350 rpm
    Displacement: 7,7 liter
Hydraulic system:
  • Load sensing
  • Variable pump (working pump):
    Flow rate:  304 l/min at 1600 rpm
    Pressure:  up to max. 350 bar
  • Hydraulic fluid: saturated, synthetic ester Panolin HLP
    SYNTH with Kleenoil microfiltration; WGK 1
Tank capacity:
  11 t / 12 t 14 t
Diesel: 190 l 225 l
AdBlue: 45 l 45 l
Hydraulic fluid: 130 l 130 l

Technical details 208F 14 t 6 cylinder

Weight:
  • from 18 000 kg
    weight distribution: front axle: 60 %, rear axle: 40 %
Tyres:
  Width: Overall Width: Width for tracks:
Serial: 710/45-26,5 2860 mm 2960 mm
Optional: 600/55-26,5 2660 mm 2760 mm
  800/40-26,5 3000 mm 3000 mm
Axles:
  • Balanced NAF portal-bogie-axles
  • Front: switchable differential lock 100 %
  • Rear: switchable differential lock 100 %
Crane:
  • Serial: Epsilon M70 F80
  • Other cranes behold crane-list
Loading area:
  • 4 rungs
  • Length: 5050 mm
  • Cross section: 4,4 m²
  • Load capacity: 14 t

HSM Crane-lists

HSM Crane-list EPSILON

X = available against surcharge, O = standard equipement, # = not available

EPSILON

Crane typ Lifting
moment		 Range Gripper
type		 208F 14 t
C60 F69 82/63 kNm 6,9 m FG43S #
C60 F86 82/51 kNm 8,6 m FG43S #
M70 F80 102/68 kNm 8,0 m FG43S O
M70 F86 102/68 kNm 8,6 m FG43S X
M70 F101 102/65 kNm 10,1 m FG43S X
M80 F80 114/79 kNm 8,0 m FG43S X
M80 F86 114/79 kNm 8,6 m FG43S X
M80 F101 114/75 kNm 10,1 m FG43S X
S100 F80 128/91 kNm 8,0 m FG43S X
S100 F86 128/90 kNm 8,6 m FG43S X
S100 F101 128/86 kNm 10,1 m FG43S X
S110 F80 143/104 kNm 8,0 m FG43S X
S110 F86 143/104 kNm 8,6 m FG43S X
S110 F101 143/100 kNm 10,1 m FG43S X
X120 F80 159/111 kNm 8,0 m FG43S X
X120 F86 159/110 kNm 8,6 m FG43S X
X120 F102 159/107 kNm 10,2 m FG43S X
X140 F80 173/123 kNm 8,0 m FG43S X
X140 F86 173/122 kNm 8,6 m FG43S X
X140 F102 173/119 kNm 10,2 m FG43S X
Low crane column
(height 1730 mm)
series at steep slope
and Kombi		       X
HSM Crane-list Mesera

X = available against surcharge, O = standard equipement, # = not available

Mesera

Crane typ Lifting
moment		 Range Gripper
type		 208F 14 t
F59 F72 78/56 kNm 7,2 m FG43S #
F59 FT85 78/51 kNm 8,5 m FG43S #
F59 FT100 78/47 kNm 10,0 m FG43S #
F59 FT100i 78/47 kNm 10,0 m FG43S #
F71 F72 99/75 kNm 7,2 m FG43S X
F71 FT85 99/70 kNm 8,5 m FG43S X
F71 FT100 99/66 kNm 10,0 m FG43S X
F71 FT100i 99/66 kNm 10,0 m FG43S X
F83 F72 106/82 kNm 7,2 m FG43S X
F83 FT85 106/76 kNm 8,5 m FG43S X
F83 FT100i 106/73 kNm 10,0 m FG43S X
M 92 F80i 130/84 kNm 8,0 m FG43S X
M 92 FT86i 130/84 kNm 8,6 m FG43S X
M 92 FT100i 130/84 kNm 10,0 m FG43S X
F111 F72 151/111 kNm 7,2 m FG43S X
F111 F85 151/100 kNm 8,5 m FG43S X
F111 FT85 151/100 kNm 8,5 m FG43S X
F111 FT91 151/98 kNm 9,1 m FG43S X
F111 FT100 151/101 kNm 10,0 m FG43S X
M122 F85i 155/110 kNm 8,5 m FG43S X
M122 F96i 155/ - kNm 9,6 m FG43S X
M122 FT100i 155/ - kNm 10,0 m FG43S X
M142 F85i 178/132 kNm 8,5 m FG43S X
M142 F96i 178/124 kNm 9,6 m FG43S X
M142 FT100i 178/ - kNm 10,0 m FG43S X