HSM 405H4 8WD

Fig. with Epsilon X270 H107 crane

Technical data 405H4 8WD

Engine (6 cylinders):
  • VOLVO
    TAD873VE EU Stage IV / EPA T4f
    Engine power: 235 kW (320 PS) / 1800 rpm
    Torque: 1300 Nm from 1200-1600 rpm
    Max torque: 1310 Nm at 1450 rpm
    Cubic capacity: 7.7 liter
Transmission:
  • Hydrostatic-mechanical
  • NAF 2-speed transfer gearbox
Axles:
  • NAF balanced portal tandem axles
  • At the front: 100 % selectable differential lock
  • At the rear: 100 % selectable differential lock
Brake:
  • 2-circuit brake, disk brakes running in an oil bath
  • Spring-loaded parking brake
Steering:
  • Articulated steering with 2 cylinders
  • 2 steering cylinders, 50° steering angle
Tyres:
  Size: Total width:
Series: 750/55-R26,5 starting at 2900 mm
    3000 mm Tapes and chains
Optional: 650/55-R26,5 2900 mm Tapes and chains
Tank capacity:
  • Diesel: 500 liters
  • AdBlue: 45 liters
  • Hydraulic fluid: 250 liters
Hydraulics:
  • Load sensing
  • Variable pump: Crane pump: 190 cm³
    Head pump: 190 cm³
    Flow rate: 532 l/min at 1400 rpm
    Pressure:up to 380 bar
  • Hydraulic fluid: Saturated, synthetic ester
    Panolin HLP SYNTH with Kleenoil
    Microfiltration; WGK 1
Cabin:
  • Height-adjustable at the front / rear +15° / -30°
  • Bent Lexan windscreen
  • Windscreen wipers in the front and at the side
  • ROPS, FOPS, OPS tested
  • Tested safety cab
  • Air cushioned seat with seat heating
  • Hot water heating
  • Auxiliary heating with cooling water and hydraulic oil preheating
  • Air conditioner
  • Height-adjustable and rotatable (270°), front / rear +11° / -13°, lateral +/- 9°
  • Optional: Sun blinds
Electrical system / Instruments:
  • HSM Ecommand colour-display
  • 5 operator programs + factory setting
  • Diagnosis-tool and error-indication
  • Graphic support at parameter editing
  • Generator 110 A (28 A)
  • 2 service-free dry batteries á 75 Ah
Weight:
  • from 29 200 kg
Torsion lock:

  • 2 hydraulic cylinders

Crane:
  • Mesera M280 V110
    Range: 11 m
    Gross lifting moment: 280 kNm
    Pivoting moment: 65 kNm
    Pivot angle: 260°
    Tilt angle: +24°/-30°

    Optional:

  • Epsilon X270 H107
    Range: 10.9 m
    Gross lifting moment: 360 kNm
    Pivoting moment: 92 kNm
    Pivot angle: 260°
    Tilt angle: +24°/-30°
Aggregate:
  • Logmax 6000
    Felling diameter: 650 mm
    Delimbing diameter: 500 mm
    Gross lifting moment: 26.9 kN
    Max. feed force speed: 5.2 m/s
    Max. operating pressure: 280 bar
  • Control: DASA
  • Other aggregates on request
Series equipment:
  • 20 LED work lights on the cab, 4 work lights in front of the crane, 2 LED work lights on the crane column, 2 LED work lights on the rear frame, bogie lift front separately switchable, voltage converter on-board voltage 24 V to 12 V, end cushioning for crane and steering cylinder, radio, fire extinguisher, first-aid kit, warning triangle, tool set, bypass filter, Diesel fill pump, hydraulic fill pump, vacuum pump
Special accessories:
  • GPS system
  • Data transfer
  • Bogielift engine carriage
  • Attachement steep slope winch, traction constant 120 kN, max. 150 kN
  • Air compressor 24 V
  • Guard bracket bonnet

HSM Crane-list 405H

Crane M221 H100:
Lifting moment brutto 188 kNm
Swivering moment 43,6 kNm
Swivel angle 260°
Crane M240 H103:
Lifting moment brutto 240 kNm
Swivering moment 54 kNm
Swivel angle 260°
Crane M280 V110:
Lifting moment brutto 280 kNm
Swivering moment 65 kNm
Swivel angle 260°
Crane X270 H107:
Lifting moment brutto 270 kNm
Swivering moment 92 kNm
Swivering moment 260°